Special design for rubber industrial.
Equipment Brief Introduction
The main function of this product is to test metal impurities in the materiel. It is made of a transducer and a controller. The characteristic of the transducer are high sensitivity, easily assembled,
firm and so on; The controller which is named JLM-D is especially designed for the rubber industry, it adopts multifarious digital signals processing technology, and it can effectively distinguish the differences between and/or among shake signals, electromagnetic disturbing signals and metal signals. And it’s completely considered the circumstances in the event where the product is working at a low speed (1m/min), the advantages of this product are the stable performances, strong anti-jamming capability, wrong alarms avoiding, and so on.
Function characteristic:
① self-learning,self- work and self-adapting in disturbing environments.
② Two levels sensitivity setting, identify the metal size automatically
③ Sensitivity continuously adjustable
④Conveyor belt speed setting
⑤Record warning times and every warning time
⑥Restore automatically or set by hand after alarms.
⑦Inspect and diagnose trouble automatically.
⑧Password protecttion
⑨The transducer coil is made of epoxide resin, which can improve the anti-oscillation function.
Parameter
Controller type JLM-D
Housing sheet steel, color is orange
Conveyor speed Type of low speed:0.5m/min~10m/min
Type of high speed:5m/min~60m/min
Connecting cables Shield cable with plug,(to the detection coil)up to 4 m standard (max.10m)
Work environment -10~+45℃ ,
opposite humidity<92%(temperature 45℃)
Type of protection IP65
Power supply AC 220V ± 10%,50Hz ± 1%,power 30W
Operation panel Graphic display double spaced, with 5 key operation, with 1 LED green lamp
and 1 red lamp
Output 2 relay output for metal alarm, 1 relay output for error message .AC 220V,
0.5A or DC 24V,0.5A
More detail info pls visit
http://www.jl-er.com/en/productshow.asp?pid=87&id=72